Why this course?

Description

Saudi Arabi Mode of Measurement For Saudi Quantity Surveyors & Civil Engineers Online Course

SYLLABUS :- 

Module 1: Introduction to Saudi Building Code and Measurement Framework
1.1 Overview of Saudi Building Code Structure
1.2 Roles of Measurement Standards in Project Delivery
1.3 Key Definitions and Terms in SBC Measurement
1.4 Harmonization with International Measurement Practices

Module 2: General Principles of Quantification
2.1 Units of Measurement and Rounding Rules
2.2 Measurement Base Lines and Reference Surfaces
2.3 Allowances for Waste, Fixings, and Tolerances
2.4 Sequence of Measurement: Gross, Net, and Provisional Quantities

Module 3: Measurement of Earthworks and Site Preparation
3.1 Setting Out and Benchmarking for Excavation
3.2 Measurement of Bulk Excavation, Backfill, and Disposal
3.3 Quantifying Rock Removal and Blinding Layers
3.4 Site Grading, Compaction and Topsoil Stripping

Module 4: Measurement of Concrete Works
4.1 Formwork Measurement: Areas, Faces and Edges
4.2 Reinforcement Measurement: Bars, Mesh and Accessories
4.3 Concrete Volume: In Situ, Precast, and Pumping Losses
4.4 Admixtures, Curing and Pumping Allowances

Module 5: Measurement of Masonry and Plaster Works
5.1 Brick and Blockwork: Course by Course Method
5.2 Stone Cladding and Veneer: Area vs. Volume Basis
5.3 Plaster and Rendering: Thickness, Length and Area Rules
5.4 Jointing, Cleaning and Waste Allowances

Module 6: Measurement of Structural Steelworks
6.1 Sectional Steel Elements: Length, Weight and Connection
6.2 Welded Assemblies and Bolted Connections
6.3 Surface Treatment: Painting, Galvanizing and Grouting
6.4 Handling, Erection and Temporary Works

Module 7: Measurement of Finishes (Floors, Walls, Ceilings)
7.1 Floor Finishes: Tiles, Timber and Raised Access Systems
7.2 Wall Finishes: Paint, Wallpaper and Cladding Panels
7.3 Ceiling Systems: Suspended, Gypsum and Metal Decking
7.4 Skirting, Architraves and Edge Trims

Module 8: Measurement of Doors, Windows and Joinery
8.1 Standard and Special Doors: Units, Frames and Hardware
8.2 Window Systems: Glazing Areas and Frame Profiles
8.3 Built-in Joinery: Cabinets, Shelving and Countertops
8.4 Allowances for Gaps, Fixings and Site Adjustments

Module 9: Measurement of Mechanical, Electrical & Plumbing Works
9.1 Pipework Measurement: Diameter, Length and Fittings
9.2 Ductwork and Conduit Systems: Surface Area and Length
9.3 Equipment Units: Pumps, Fans and Switchgear
9.4 Testing, Commissioning and Leak-test Allowances

Module 10: Preparation and Documentation of Bill of Quantities
10.1 Structure of an SBC-compliant BOQ
10.2 Cross-referencing Specifications and Drawings
10.3 Provisional Sums, Dayworks and Prime Cost Items
10.4 Quality Checks, Revisions and Tender Presentation