arrow_back
Module 1: Introduction to Saudi Building Code and Measurement Framework
1-Saudi-Building-Code-Measurement-Practices
1.1 Overview of Saudi Building Code Structure
1.2 Roles of Measurement Standards in Project Delivery
1.3 Key Definitions and Terms in SBC Measurement
1.4 Harmonization with International Measurement Practices
Module 2: General Principles of Quantification
2-Understanding-the-Saudi-Building-Code-Measurement-Standards
2.1 Units of Measurement and Rounding Rules
2.2 Measurement Base Lines and Reference Surfaces
2.3 Allowances for Waste, Fixings, and Tolerances
2.4 Sequence of Measurement: Gross, Net, and Provisional Quantities
Module 3: Measurement of Earthworks and Site Preparation
3-Earthworks-and-Site-Preparation-Measurement-in-Saudi-Building-Code
3.1 Setting Out and Benchmarking for Excavation
3.2 Measurement of Bulk Excavation, Backfill, and Disposal
3.3 Quantifying Rock Removal and Blinding Layers
3.4 Site Grading, Compaction and Topsoil Stripping
Module 4: Measurement of Concrete Works
4-Understanding-Concrete-Works-Measurement-in-Saudi-Building-Code
4.1 Formwork Measurement: Areas, Faces and Edges
4.2 Reinforcement Measurement: Bars, Mesh and Accessories
4.3 Concrete Volume: In Situ, Precast, and Pumping Losses
4.4 Admixtures, Curing and Pumping Allowances
Module 5: Measurement of Masonry and Plaster Works
5-Saudi-Building-Code-Measurement-of-Masonry-and-Plaster-Works
5.1 Brick and Blockwork: Course by Course Method
5.2 Stone Cladding and Veneer: Area vs. Volume Basis
5.3 Plaster and Rendering: Thickness, Length and Area Rules
5.4 Jointing, Cleaning and Waste Allowances
Module 6: Measurement of Structural Steelworks
6-Measurement-of-Structural-Steelworks-Saudi-Building-Code-Practices
6.1 Sectional Steel Elements: Length, Weight and Connection
6.2 Welded Assemblies and Bolted Connections
6.3 Surface Treatment: Painting, Galvanizing and Grouting
6.4 Handling, Erection and Temporary Works
Module 7: Measurement of Finishes (Floors, Walls, Ceilings)
7-Measurement-of-Finishes-Floors-Walls-Ceilings
7.1 Floor Finishes: Tiles, Timber and Raised Access Systems
7.2 Wall Finishes: Paint, Wallpaper and Cladding Panels
7.3 Ceiling Systems: Suspended, Gypsum and Metal Decking
7.4 Skirting, Architraves and Edge Trims
Module 8: Measurement of Doors, Windows and Joinery
8-Saudi-Building-Code-Guide-to-Measuring-Doors-Windows-and-Joinery
8.1 Standard and Special Doors: Units, Frames and Hardware
8.2 Window Systems: Glazing Areas and Frame Profiles
8.3 Built-in Joinery: Cabinets, Shelving and Countertops
8.4 Allowances for Gaps, Fixings and Site Adjustments
Module 9: Measurement of Mechanical, Electrical & Plumbing Works
9-Measurement-of-Mechanical-Electrical-and-Plumbing-Works
9.1 Pipework Measurement: Diameter, Length and Fittings
9.2 Ductwork and Conduit Systems: Surface Area and Length
9.3 Equipment Units: Pumps, Fans and Switchgear
9.4 Testing, Commissioning and Leak-test Allowances
Module 10: Preparation and Documentation of Bill of Quantities
10-Saudi-Building-Code-Bill-of-Quantities-Preparation-and-Documentation
10.1 Structure of an SBC-compliant BOQ
10.2 Cross-referencing Specifications and Drawings
10.3 Provisional Sums, Dayworks and Prime Cost Items
10.4 Quality Checks, Revisions and Tender Presentation