Why this course?

Description

Principles of Measurement International (POMI) Online Course for Quantity Surveyors Civil Engineers

SYLLABUS :- 

Module 1: Introduction to POMI and Gulf Context
1.1 History and Objectives of POMI
1.2 Structure and Sections of the Standard Method
1.3 Benefits of Standardized Measurement
1.4 Regional Adaptations for Gulf Projects (units, currencies, local conventions)

Module 2: Fundamental Measurement Rules
2.1 Linear Measurement Principles (lengths, profiles)
2.2 Area Measurement (floor finishes, roofing)
2.3 Volume Measurement (concrete, earthworks)
2.4 Counting and Numbering (repetitive items, fixings)

Module 3: Measurement of Earthworks
3.1 Site Stripping, Topsoil and Overburden Removal
3.2 Excavation in Soil versus Rock—Rule Variations
3.3 Fill, Backfill and Compaction Allowances
3.4 Haulage Distances and Disposal Quantities (Gulf transport rates)

Module 4: Measurement of Concrete Works
4.1 Plain and Mass Concrete—Volume Rules
4.2 Reinforced Concrete—Bar Schedules and Overlaps
4.3 Precast Elements—Pack, Transport and Erection Quantities
4.4 Concrete Specialties (blinding, pump allowance, admixtures)

Module 5: Measurement of Masonry Works
5.1 Brick and Block Walls—Unit and Mortar Volume
5.2 Stone Masonry—Random and Ashlar Treatments
5.3 Cavity and Composite Wall Systems
5.4 Openings, Beddings and Lintels

Module 6: Measurement of Formwork and Falsework
6.1 Shuttering for Slabs, Beams and Columns
6.2 Centering and Falsework Supports
6.3 Removal and Re-use Deductions
6.4 Special Formwork (curves, soffits, undercuts)

Module 7: Measurement of Structural Steel
7.1 Sections and Platework—Weight to Volume Conversion
7.2 Connections, Bolts and Welding Allowances
7.3 Protective Coatings and Fireproofing Thickness
7.4 Erection and Handling—Gulf Crane/HSE Considerations

Module 8: Measurement of Finishes
8.1 Plastering and Render—Area and Thickness Rules
8.2 Screeds and Floor Toppings—Depth and Mix Ratios
8.3 Tiling, Stone Cladding—Unit Counts and Wastage
8.4 Painting and Surface Protection—Coverage Rates

Module 9: Measurement of Waterproofing and Insulation
9.1 Membrane and Liquid Applied Systems—Area Rules
9.2 Thermal Insulation Boards—Thickness and Coverage
9.3 Roof and Deck Waterproofing Specifics
9.4 Joint Sealing and Flashing Details

Module 10: Measurement of Mechanical Installations
10.1 Ductwork—Linear, Area and Volume Rules
10.2 Pipework—Diameters, Lengths, Fittings and Valves
10.3 HVAC Equipment—Pack, Install and Test Allowances
10.4 Insulation for Pipes and Ducts

Module 11: Measurement of Electrical Installations
11.1 Conduits and Cable Trays—Linear and Fitting Counts
11.2 Cables by Core-Metre and Multicore Rules
11.3 Switchgear, Panels and Distribution Boards
11.4 Lighting Fixtures and Small Power Outlets

Module 12: Measurement of Sanitary and Plumbing Works
12.1 Cold and Hot Water Piping—Diameters and Lengths
12.2 Drainage and Sewage Lines—Gradient and Bedding
12.3 Fixtures, Traps and Accessories—Unit Counts
12.4 Testing and Commissioning Allowances

Module 13: External Works and Landscaping
13.1 Roads, Pavements and Kerbs—Area and Linear Rules
13.2 Hard and Soft Landscaping Quantities
13.3 Drainage Channels, Manholes and Gullies
13.4 Fencing, Gates and Site Furniture

Module 14: Bills of Quantities Preparation
14.1 Bill Structure: Work Sections and Item Groupings
14.2 Item Descriptions: Clarity, Cross-Referencing
14.3 Measurement Entries and Units of Measure
14.4 Summaries, Provisional Sums and Prime Cost Sums

Module 15: Provisional Sums, Variations and Final Account
15.1 Provisional and Prime Cost Sum Rules
15.2 Measurement of Dayworks and Labour Rates
15.3 Variation Measurement and Re-measurement Procedures
15.4 Final Account Reconciliation and Certification