arrow_back
Site-Works-Inspection-and-Supervision-for-High-Rise-Buildings
Module 1: Introduction to Site Inspection in High-Rise Buildings
• Importance of site inspections.
• Challenges specific to G+45 structures.
• Key inspection roles and responsibilities.
• Tools and technologies for inspections (laser levels, drones, ultrasonic testers, etc.).
High-Rise-Building-Site-Inspection-Ensuring-Quality-and-Safety
Module 2: Foundation Inspection
• Soil and geotechnical report assessment.
• Inspection of excavation and foundation works (raft, pile, or mat foundations).
• Verifying concrete strength and curing for foundations.
• Anchor bolt alignment and waterproofing checks.
Foundation-Inspection-for-High-Rise-Buildings
Module 3: Structural Framework Inspection
• Inspection of RCC and steel frameworks.
• Ensuring compliance with structural drawings and load specifications.
• Checklist for formwork, reinforcement, and concreting.
• Post-concreting inspections (cracks, honeycombing, and deviations).
Structural-Framework-Inspection-Building-Strong-Foundations
Module 4: Façade and Cladding Inspections
• Quality control of façade materials (glass, aluminum, stone, etc.).
• Inspection of installation techniques (curtain walls, panels, etc.).
• Water seepage and thermal insulation checks.
• Safety considerations during façade work.
Facade-and-Cladding-Inspections-Quality-Control-and-Safety
Module 5: Vertical Transportation Systems
• Inspection of elevator shafts and escalator spaces.
• Alignment checks for guide rails and other components.
• Quality and safety compliance for installation.
• Load testing and commissioning.
Vertical-Transportation-Systems-Inspection-and-Safety
Module 6: Plumbing and Sanitation Inspections
• Inspection of plumbing layouts and material quality.
• Verifying water supply systems, drainage, and sewage lines.
• Ensuring proper pipe jointing and insulation.
• Testing water pressure and flow.
Plumbing-and-Sanitation-Inspections-The-Buildings-Lifeline
Module 7: Electrical Systems Inspection
• Verifying conduit layouts and cable installations.
• Inspection of panels, transformers, and switchgear.
• Ensuring grounding, earthing, and surge protection compliance.
• Functional testing of lighting, power sockets, and emergency systems.
Electrical-Systems-Inspection-Ensuring-Building-Safety
Module 8: Fire Safety Systems Inspection
• Verifying installation of sprinklers, fire alarms, and hydrants.
• Inspecting fireproofing materials for columns and beams.
• Emergency evacuation systems (stairwells, signage, etc.).
• Testing fire detection and suppression systems.
Fire-Safety-Systems-Inspection
Module 9: HVAC System Inspections
• Checking duct layouts, insulation, and sealing.
• Inspection of chillers, cooling towers, and air handlers.
• Ensuring compliance with energy efficiency and air quality standards.
• Functional testing of HVAC systems.
HVAC-System-Inspections-Ensuring-Efficiency-and-Comfort
Module 10: Waterproofing and Roofing Inspections
• Inspection of basement, terrace, and wet area waterproofing.
• Testing roof drainage systems.
• Verifying material quality and application techniques.
• Water leakage testing.
Waterproofing-and-Roofing-Inspections
Module 11: Interior Finishes and Fit-Outs
• Inspecting flooring, walls, and ceilings for uniformity and defects.
• Ensuring compliance with material specifications (tiles, paints, plaster, etc.).
• Inspection of doors, windows, and fittings.
• Testing acoustic performance and thermal insulation.
Interior-Finishes-and-Fit-Outs-Quality-Inspection-Guide
Module 12: Safety Inspections During Construction
• Key safety protocols for high-rise construction.
• Inspection of scaffolding, lifting equipment, and work platforms.
• Ensuring compliance with OSHA and other safety standards.
• Conducting safety audits and mock drills.
Safety-Inspections-During-Construction
Module 13: Environmental and Sustainability Inspections
• Ensuring compliance with green building standards (LEED, IGBC, etc.).
• Waste management inspections.
• Checking installation of renewable energy systems (solar panels, etc.).
• Monitoring air and water pollution control measures.
Environmental-and-Sustainability-Inspections
Module 14: Documentation and Reporting
• Preparing site inspection checklists and logs.
• Writing non-conformance reports (NCRs) and rectification plans.
• Coordinating with contractors and engineers for resolution.
• Inspection approval processes and handover documentation.
Effective-Documentation-and-Reporting-in-Construction
Module 15: Final Handover Inspection
• Conducting final walkthroughs for all civil works.
• Ensuring operational readiness of all systems.
• Punch list preparation and resolution.
• Certification and sign-off for project completion.
Final-Handover-Inspection-Ensuring-Project-Excellence
Module 16: Brickwork Inspections and Quality Control
Material Quality and Storage
Brickwork Alignment and Bonding
Structural and Load-Bearing Checks
Common Defects and Rectification
Checklist for Brickwork Inspection
Brickwork-Inspections-and-Quality-Control