arrow_back
Module 1: Introduction to Quality Control & Assurance in Construction
1-Quality-Control-and-Assurance-in-Construction-Foundations-for-Excellence
1.1 Definition and Importance of Quality Control (QC) and Quality Assurance (QA)
1.2 Overview of American Quality Standards in Construction
1.3 Roles and Responsibilities in QC & QA Teams
1.4 Quality Management Systems (QMS) in Construction
Module 2: Quality Planning and Documentation
2-Quality-Planning-and-Documentation-A-Comprehensive-Guide-for-Construction-Professionals
2.1 Developing Quality Management Plans (QMP)
2.2 Inspection and Test Plans (ITPs)
2.3 Document Control and Record Keeping
2.4 Setting Quality Objectives and Key Performance Indicators (KPIs)
Module 3: Material Quality Control and Testing
3-Material-Quality-Control-and-Testing-for-Construction
3.1 Quality Standards for Construction Materials (ASTM, ACI)
3.2 Sampling Techniques and Frequency
3.3 Laboratory Testing of Materials
3.4 Material Approval Process and Certificates of Compliance
Module 4: Concrete Quality Control and Assurance
4-Concrete-Quality-Control-and-Assurance-Best-Practices-for-Civil-Engineers
4.1 Concrete Mix Design and Quality Requirements (ACI 318)
4.2 Concrete Testing Procedures (Slump, Strength, Air Content)
4.3 Inspection during Placement and Curing
4.4 Non-Destructive Testing (NDT) of Concrete
Module 5: Structural Steel Quality Control
5-Structural-Steel-Quality-Control-Standards-Inspection-and-Implementation
5.1 Steel Material Standards and Certification (ASTM, AISC)
5.2 Welding Quality Assurance and Inspection
5.3 Bolted Connections Quality Control
5.4 Steel Erection Quality and Safety Checks
Module 6: Soil and Foundation Quality Control
6-Soil-and-Foundation-Quality-Control-Best-Practices-for-Civil-Engineers_pdf
6.1 Soil Testing Standards and Procedures (ASTM D Standards)
6.2 Foundation Inspection and Load Testing
6.3 Quality Control for Concrete Foundations
6.4 Mitigating Risks from Soil Issues
Module 7: Quality Control in Masonry Works
7.1 Masonry Material Standards (ASTM C90 for Concrete Masonry Units)
7.2 Mortar Mix Design and Testing
7.3 Masonry Construction Inspection Procedures
7.4 Common Defects and Repair Techniques
Module 8: Electrical and Mechanical QA/QC
8-Electrical-and-Mechanical-QAQC-Standards-Practices-and-Implementation_pdf
8.1 Standards for Electrical Installations (NEC, ANSI)
8.2 Mechanical Systems Quality Assurance
8.3 Equipment Testing and Commissioning
8.4 Safety Standards and Compliance Checks
Module 9: Quality Control in Finishing Works
9-Quality-Control-in-Finishing-Works-Ensuring-Excellence-in-Construction_pdf
9.1 Standards for Paints and Coatings (ASTM D Standards)
9.2 Flooring and Tiling Quality Checks
9.3 Door and Window Installation QA
9.4 Final Inspection and Defect Liability Period Management
Module 10: Environmental Quality Assurance in Construction
10-Environmental-Quality-Assurance-in-Construction
10.1 Environmental Standards and Regulations (EPA, ASTM E Standards)
10.2 Waste Management and Recycling Procedures
10.3 Air and Noise Quality Monitoring
10.4 Sustainability and Green Building Quality Controls
Module 11: Safety Quality Assurance in Construction
11-Safety-Quality-Assurance-in-Construction-American-Standards-and-Practices_pdf
11.1 Safety Standards and Codes (OSHA, ANSI)
11.2 Safety Training and Awareness Programs
11.3 Accident Reporting and Investigation Procedures
11.4 Safety Audits and Continuous Improvement Example: Safety audit checklist
Module 12: Quality Control in Project Management
12-Quality-Control-in-Project-Management-Best-Practices-for-Civil-Engineers
12.1 Integrating QA/QC in Project Scheduling and Planning
12.2 Risk Management in Quality Control Template: Risk assessment matrix for QC risks
12.3 Communication and Reporting Systems for QA/QC
12.4 Use of Technology in QA/QC (Drones, BIM)
Module 13: Audits and Inspections in Quality Assurance
13-Construction-Quality-Assurance-Audits-and-Inspections
13.1 Types of Audits (Internal, External, Third-Party)
13.2 Audit Checklists for Various Construction Activities
13.3 Non-Conformance Reporting and Corrective Actions
13.4 Follow-up and Closure of Quality Issues
Module 14: Legal and Contractual Aspects of Quality Assurance
14-Legal-and-Contractual-Aspects-of-Quality-Assurance-in-Construction
14.1 Understanding Contract Specifications and Standards
14.2 Documentation for Claims and Disputes
14.3 Liability and Warranty Management in Construction Quality
14.4 Role of Quality in Contract Closeout
Module 15: Case Studies and Best Practices
15-Quality-Control-and-Assurance-Case-Studies-and-Best-Practices-in-Construction
15.1 Case Study: Quality Control in a High-Rise Building Project
15.2 Case Study: Quality Assurance in Infrastructure Projects
15.3 Best Practices in Quality Control Using American Standards
15.4 Developing a Quality Culture in Construction Teams