arrow_back
Module 1: Fundamentals of Electrical Layout Planning
1-Lighting-Cable-Routing-and-Conduit-Layout-Planning-for-Residential-and-Commercial-Projects
1.1 Basics of Electrical Systems in Buildings
1.2 Difference Between Residential and Commercial Electrical Layouts
1.3 Coordination Between Architecture, Electrical, and Structural Drawings
Module 2: Lighting Design Concepts and Planning
2-Lighting-Design-Concepts-and-Planning
2.1 Principles of Illumination and Lighting Levels (Lux Values)
2.2 Fixture Selection: Indoor, Outdoor, and Decorative Lighting
2.3 Lighting Layout Preparation and Circuit Distribution Methods
Module 3: Cable Routing Fundamentals
3-Cable-Routing-Fundamentals
3.1 Classification of Electrical Cables (LV, MV, Control, Communication)
3.2 Cable Route Selection Criteria and Load Segregation
3.3 Methods of Cable Installation – Trays, Trenches, and Concealed Runs
Module 4: Conduit System Planning and Layout
4-Conduit-System-Planning-and-Layout
4.1 Types of Conduits (PVC, GI, EMT, Flexible, Underground)
4.2 Conduit Routing in Walls, Slabs, and Ceilings
4.3 Junction Box, Pull Box, and Bends – Layout and Spacing Rules
Module 5: Load Distribution and Circuit Segmentation
5-Load-Distribution-and-Circuit-Segmentation
5.1 Load Scheduling for Lighting and Power Circuits
5.2 DB (Distribution Board) and Sub-DB Placement Strategy
5.3 Balancing of Circuits and Minimizing Voltage Drop
Module 6: Drawing Preparation and Symbol Standardization
6-Drawing-Preparation-and-Symbol-Standardisation
6.1 Standard Symbols for Lighting and Power Layouts
6.2 Preparation of Single Line Diagrams (SLD) and Layout Drawings
6.3 Cross-Referencing Between Lighting, Power, and Switch Board Schedules
Module 7: Site Execution of Lighting and Conduit Works
7-Site-Execution-of-Lighting-and-Conduit-Works
7.1 Marking, Chasing, and Sleeve Provisions in Civil Works
7.2 Conduit Laying, Box Fixing, and Wire Pulling Procedures
7.3 On-site Quality Checks and Testing of Installed Conduits
Module 8: Cable Management, Routing, and Identification
8-Cable-Management-Routing-and-Identification
8.1 Vertical and Horizontal Cable Management Techniques
8.2 Cable Tagging, Numbering, and Color Coding Standards
8.3 Avoiding Cross-Interference and Ensuring Separation from HVAC/Plumbing Services
Module 9: Safety, Compliance, and Inspection
9-Safety-Compliance-and-Inspection
9.1 Earthing and Bonding Requirements in Lighting Circuits
9.2 Electrical Safety Clearances and Local Code Compliance
9.3 Inspection Checklists for Lighting and Cable Routing Works
Module 10: Maintenance and As-Built Documentation
10-Maintenance-and-As-Built-Documentation
10.1 Periodic Inspection and Maintenance of Lighting Circuits
10.2 Updating As-Built Drawings and Route Markings
10.3 Troubleshooting Common Problems in Cable and Conduit Systems