arrow_back
Module 1: Introduction to KSA Material Standards
1-KSA-Complete-Material-List-and-Knowledge-Course
1.1 Overview of Saudi Building Code (SBC) material requirements
1.2 National Regulations & SASO certification processes
1.3 Local sourcing vs. import controls
1.4 Quality assurance and testing protocols
Module 2: Cement and Binders
2-Cement-and-Binders-in-Saudi-Construction-Complete-Material-Guide
2.1 OPC grades & Sulphate-resistant cement types
2.2 Pozzolanic and blended cements (PFA, GGBS)
2.3 Cement packaging, storage, and shelf-life
2.4 Approved KSA manufacturers and suppliers
Module 3: Fine and Coarse Aggregates
3.1 River sand, crushed sand, dune sand properties
3.2 Crushed stone, gravel gradations & standards
3.3 Material testing (silt content, particle size)
3.4 Aggregate handling, stock-pile management
Module 4: Concrete Admixtures and Reinforcement
4.1 Water-reducing, retarding, accelerating admixtures
4.2 Corrosion inhibitors and waterproofing admixtures
4.3 Steel reinforcement bars (HYSD grades, epoxy-coated)
4.4 Reinforcement accessories (chairs, spacers, couplers)
Module 5: Structural Steel and Metals
5.1 Hot-rolled sections (I-beam, H-beam, channels)
5.2 Steel plates, sheets, and cold-formed profiles
5.3 Fasteners: bolts, nuts, washers, anchors
5.4 Surface treatments: galvanizing, painting, fireproofing
Module 6: Masonry Units and Mortars
6.1 Hollow & solid concrete blocks, clay bricks
6.2 Natural stone (limestone, granite) and veneers
6.3 Masonry mortar types (M-5, M-10, M-15, M-20)
6.4 Reinforced masonry and seismic considerations
Module 7: Timber and Wood Products
7.1 Structural timber grades & treatments
7.2 Plywood, MDF, particle board specifications
7.3 Decorative veneers, laminates, hardwood flooring
7.4 Storage, moisture control, and handling
Module 8: Water-Proofing and Insulation
8.1 Bituminous membranes, sheet and liquid applied
8.2 Thermal insulation (EPS, XPS, rock wool)
8.3 Acoustic insulation materials and partitions
8.4 Application methods and compatibility checks
Module 9: Roofing and Cladding Systems
9.1 Metal roofing profiles & fixings
9.2 Composite panels and sandwich systems
9.3 Stone, ceramic, and terracotta cladding
9.4 Flashings, gutters, drainage accessories
Module 10: Electrical Materials
10.1 Cables and conductors (XLPE, PVC-insulated)
10.2 Switchgear: MCBs, MCCBs, RCCBs, distribution panels
10.3 Lighting fixtures (LED, fluorescents) and controls
10.4 Earthing, lightning protection, and conduits
Module 11: Plumbing and Sanitary Materials
11.1 Piping systems (PVC-U, CPVC, HDPE, GI, PPR)
11.2 Valves, fittings, and connectors
11.3 Sanitary fixtures: WC, basins, urinals, flush tanks
11.4 Water treatment, pumps, and storage tanks
Module 12: HVAC Materials and Equipment
12.1 Ducting: GI, aluminum, flexible ducts
12.2 Insulation for HVAC (foil-backed, elastomeric)
12.3 Air-handling units, chillers, VRF systems
12.4 Diffusers, grilles, dampers, and controls
Module 13: Finishes – Wall, Floor, Ceiling
13.1 Ceramic, porcelain, and natural stone tiles
13.2 Paints, primers, and wall coverings
13.3 False ceilings: gypsum, metal, mineral fiber
13.4 Floor finishes: vinyl, carpet, hardwood
Module 14: Doors, Windows, and Glazing
14.1 Steel, aluminum, and UPVC frames
14.2 Hollow-core and solid timber doors
14.3 Glass types: annealed, tempered, laminated, insulated
14.4 Hardware: locks, hinges, handles, weather-seals
Module 15: Procurement, Logistics & Quality Control
15.1 Bill of Quantities for material take-off
15.2 Vendor pre-qualification and tendering
15.3 Material tracking, delivery schedules, warehousing
15.4 Inspection, non-conformance reporting, and rework